PRODUCTS

  • SUS COAT
  • SUS COAT

SUS COAT

YL-316B

Packaging unit

Aerosol 420㎖/Can, 20cans/Box

Product information

SUS COAT(YL-316B) is Stainless-Steel Coating Agent for heat resistance & corrosion suppression.

※ Characteristics and effects are as follows.

  • Stainless pigment(thin section) becomes a continuous laminated film to completely block contacts with water or air.
  • Formation of stainless films on the surface of all materials: Metal, wood, stone, pottery, brick, concrete, mortar, glass, plastic, rubber, leather, statue, paper, etc.
  • Long-term protection: From corrosion, erosion, rust, wear, deterioration, contamination, etc. of all materials
  • Thermal insulation & thermo-keeping: High thermo-keeping as heat or light is reflected due to excellent characteristics, and the thermal conductivity is extremely low.
  • Non-conductiveness: Usable for electrical, electrical parts.
  • Formation of a dense, continuously laminated film: Excellent protection performance against damage due to humidity, heat, etc. or wear.
  • Ultraviolet radiation and weatherproofing: protection from effects of UV or atmosphere, maintenance for glossiness for a few years.
  • Strong performance of resistance to water & humidity.
  • Excellent heat resistance.

Usage

  • Vessel, vehicle, power generation facility, building, outdoor steel structure, various machines.
  • Boiler, heating & cooling piping, ironworks, casting plant, glass plant.
  • Fuel tank, steel pipe, muffler, radiator, heating & cooling equipment.
  • Surfaces of metal, wood, concrete, mortar, rubber, plastic, and paper.

How to use

  • Remove dust, oil, rust, etc. from the application surface.
  • Shake up and down lightly before use.
  • Spray 2 - 3 times from a distance of 20 ~ 30 cm from the coating surface.
    (When painting, do not apply a single coating of the desired thickness at once, but divide it into several applications.)
  • Apply it again depending on desired thickness.
  • Time for tack free drying is about 2∼3 minutes.
  • Complete hardening takes 24 hours.
  • Use the target after complete hardening.

Precautions

  • Please observe the following points when storing and using the product and discard.
    1. Even though it is low-flammable, keep away from fire to spray it.
    2. Provide good ventilation for long-time use.
    3. Keep it in the well-ventilated place below 40℃.
    4. Do not use it toward fire.
    5. Do not use near heater or stove.
    6. Do not use in the room using fire.
    7. Do not keep it in the place above 40℃.
    8. Provide ventilation to use it in the closed room.
    9. Do not throw it away into fire.
    10. Punch the can to throw it away.
    11. Do not keep it in the closed place.
    12. Spraying may not work well below 5℃.