PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 420㎖/Can, 20cans/Box
Product information
YECOA YL-701 has good liquidity for welding Slag, and excellent peeling characteristics of slag lump.
- Excellent permeability.
- Safe for metals due to non-corrosiveness.
- Satisfactory surface states.
- Outstanding peeling characteristics of Slag as compared with the past (more than 3 times)
- No occurrence of Blow Hole (in the case of 2 Pieces)
- Satisfactory peeling characteristics of Slag at base metal temperature of 60℃ Slug remover for manual welding.
Usage
- Semi-automatic welding, automatic welding, etc.
How to use
- Always wear safety equipment before work.
- Keep 30cm away from target object to spray the product.
- After the coating on the weld when removing Slag generated during the operation, excellent peeling property of Slag.
- Do not use it near fire.
Precautions
- It can catch fire when temperature is over 200℃ in using the product.
- Be careful.
- Odor is felt hardly when fume and gas are created.
- Use it in the well-ventilated place.
- Keep it in the cool place below 40℃
- Please observe the following points when storing and using the product and discard.
- Even though it is low-flammable, keep away from fire to spray it.
- Provide good ventilation for long-time use.
- Keep it in the well-ventilated place below 40℃.
- Do not use it toward fire.
- Do not use near heater or stove.
- Do not use in the room using fire.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Do not keep it in the closed place.
- Spraying may not work well below 5℃.