Insulation coating agent
to think the nature and environment.
Acrylic insulation agent

Packing unit :

Aerosol 420㎖/Can, 20cans/Box

Product information

 YECOA YL-902 is a product with excellent insulation, humidity-proofing, hydrophobicity,

?dust-protection effect.

Flexibility and endurance are satisfactory, while it takes pride in superior adhesion.

It is a product with excellent insulation characteristics and prevention of chemical intrusion.

● Acrylic hydrophobic insulation agent of room-temperature curing type.

● Excellent resistance to ozone, arc, heat and chemicals.

● Excellent adhesion and surface gloss.

● Excellent resistance to impact, wear, and vibration.

● RoHS(6 type hazardous substances) undetected.




● PCB Board

● Coating agent for humidity proofing and sealing protection

● Insulation agent for Coil, Connectors, Control Box, etc.


How to use

Always wear safety equipment before work.

Clean the dust, oil contents and grease on the metal surface.

   (Using our ECC cleaner, they are removed easily)

Shake up and down lightly before use.

Spray twice or three times to make thick film formed.

Spray it about 20~30cm away from target object.


Do not use it to human body.

Provide good ventilation.

Keep it in the place below 40without direct sunlight.

Do not spray it toward fire.

Avoid contact with it, because contact with strong alkali, strong acid cleaner and thinner

   (B.T.X) makes coating film damaged after coating film forms.

 ※ Please observe the following points when storing and using the product and discard.

Even though it is low-flammable, keep away from fire to spray it.

Provide good ventilation for long-time use.

Keep it in the well-ventilated place below 40.

Do not use it toward fire.

Do not use near heater or stove.

Do not use in the room using fire.

Do not keep it in the place above 40.

Provide ventilation to use it in the closed room.

Do not throw it away into fire.

Punch the can to throw it away.

Do not keep it in the closed place.

Spraying may not work well below 5℃.

Terms and Conditions
Privacy Policy
(49422) 83, Bibong-ro, Saha-gu, Busan, Korea. TEL. (82-51) 207-2091 FAX. (82-51) 202-5545 CUSTOMER SERVICE. 1599-0150 E-Mail :
Entrepreneur : Lee Geun-hong Corporate registration number : 603-81-23835