to think the nature and environment.
Mold(resin) Cleaner

Packing unit :

Aerosol 420㎖/Can, 20cans/Box

Product information

 YECOA YL-107 realizes harmony between excellent cleaning power and swift evaporation

characteristics to display powerful cleaning by deeply penetrating into a complicated mold.

 Light oil, grease, dust, carbon, carbides, injection molding residues are completely removed

without causing any damage to the cleaned object.




Cleaning of injection molding residues from a mold and carbon

Degreasing cleaning of all precision machines and metals

Cleaning of fine and precise machines as well as aeronautic and electronic engineering instruments

Cleaning and degreasing of all metal parts and apparatuses, etc. as well as removal of

    carbides and carbon residues of a mold upon injection molding

Removal of gasket and paint, peeling of enamel, lacquer, varnish, epoxy resin, etc.



How to use

Always wear safety equipment before work.

Remove dust or dirt off applied surface to apply it.

Use brush or sand paper to remove rust or scale and apply it.

Spray twice or three times to make cleaning.

Spray it about 20~30cm away from target object.



 ※ Please observe the following points when storing and using the product and discard.

Even though it is low-flammable, keep away from fire to spray it.

Provide good ventilation for long-time use.

Keep it in the well-ventilated place below 40.

Do not use it toward fire.

Do not use near heater or stove.

Do not use in the room using fire.

Do not keep it in the place above 40.

Provide ventilation to use it in the closed room.

Do not throw it away into fire.

Punch the can to throw it away.

Do not keep it in the closed place.

Spraying may not work well below 5.

Terms and Conditions
Privacy Policy
(49422) 83, Bibong-ro, Saha-gu, Busan, Korea. TEL. (82-51) 207-2091 FAX. (82-51) 202-5545 CUSTOMER SERVICE. 1599-0150 E-Mail :
Entrepreneur : Lee Geun-hong Corporate registration number : 603-81-23835