Releasing agent
to think the nature and environment.
Rubber releasing agent

Packing unit :

Aerosol 420㎖/Can, 20cans/Box

Product information

 YECOA YL-205 is an excellent rubber releasing agent .

● Hight molecular-weight compound with the solvent not containing chlorine compounds as the

    main composition.

● Superior for all of natural rubber, synthetic rubber, other thermosetting resins irrespective of rubber types

● Releasing for several times possible (To obtain the maximum frequency of releasing, the releasing

    agent sprinkled onto the mold should be cured at 93℃ or the agent should be cured at a forming

    temperature(the higher, the better))

● Superior heat resistance.


● Rubber forming: Rubbers such as NR, NBR, SBR, etc.

● Epoxy, polyester, phenolic resin, thermosetting resin, old releasing agent.



How to use

Always wear safety equipment before work.

Degrease oil content, dirt and dust on the metal surface by using YL-107.

Shake the container before using it.

Apply it 2030cm away from target object.

Apply it again depending on desired thickness.

Solvent resistance, cohesion and heat resistance increase.

Please confirm the application. 



 Please observe the following points when storing and using the product and discard.

● Even though it is low-flammable, keep away from fire to spray it.

● Provide good ventilation for long-time use.

● Keep it in the well-ventilated place below 40℃.

● Do not use it toward fire.

● Do not use near heater or stove.

● Do not use in the room using fire.

● Do not keep it in the place above 40℃.

● Provide ventilation to use it in the closed room.

● Do not throw it away into fire.

● Punch the can to throw it away.

● Do not keep it in the closed place.

● Spraying may not work well below 5℃.

Terms and Conditions
Privacy Policy
(49422) 83, Bibong-ro, Saha-gu, Busan, Korea. TEL. (82-51) 207-2091 FAX. (82-51) 202-5545 CUSTOMER SERVICE. 1599-0150 E-Mail :
Entrepreneur : Lee Geun-hong Corporate registration number : 603-81-23835