to think the nature and environment.
Oil remover from metal surfaces (nonflammable)

Packing unit :

Aerosol 420㎖/Can, 20cans/Box

Product information

 YECOA YL-403 has excellent penetration and cleaning which allows swift penetration into

the deepest part of a complicated apparatus, removing the need for disassembly and assembly of

the machine and hence enabling time and cost to be saved, Also, it has rapid evaporation

characteristics so as not to require a separate drying process along with an advantage as a

nonflammable cleaner of allowing safe use even during equipment operation.


Cleaning and degreasing of all metal parts and apparatuses, etc.

Cleaning and degreasing of crank case, engine, brake lining, spring, carburetor system parts.

Maintenance of petroleum pipelines.



How to use

Always wear safety equipment before work.

Remove dust or dirt off applied surface to apply it.

Use brush or sand paper to remove rust or scale and apply it.

Spray twice or three times to make cleaning.

Spray it about 20~30cm away from target object.


Ventilation is necessary during use.

● Avoid long-time skin contact. Keep in the place below 40without direct sunlight.

Test it before applying it to rubber, plastics and paints.

Please observe the following points when storing and using the product and discard.

Do not use it toward fire.

Provide good ventilation for long-time use.

Do not use near heater or stove.

Do not keep it in the place above 40.

Provide ventilation to use it in the closed room.

Do not throw it away into fire.

Punch the can to throw it away.

Spraying may not work well below 5.


Terms and Conditions
Privacy Policy
(49422) 83, Bibong-ro, Saha-gu, Busan, Korea. TEL. (82-51) 207-2091 FAX. (82-51) 202-5545 CUSTOMER SERVICE. 1599-0150 E-Mail :
Entrepreneur : Lee Geun-hong Corporate registration number : 603-81-23835