PRODUCTS

  • COLD SILVER GALVANIZING
  • COLD SILVER GALVANIZING

COLD SILVER GALVANIZING

YECOA YL-501S

Packaging unit

Aerosol 420㎖/Can, 20cans/Box

Product information

YECOA YL-501S is a silver galvanizing agent.
  • Excellent durability, heat resistance(heat resistance 250℃)
  • Galvanizing with excellent heat resistance & chemical resistance for coated parts, accompanied by excellent durability.
  • High-adhesion special binder plating agent for vessel, vehicle, bridge, power generation, building, etc.
  • Excellent rust inhibition particularly for harsh environments with much salt or ease of corrosion or even already corroded metal surfaces.

Usage

  • Rust inhibition for steel materials and structures.
  • Repair and substitution for zinc plating, repair and finish coating for damaged part of plating.
  • Bridge, steel tower, steel automobile, railroad vehicle, gas piping, pipe, etc.
  • High-temperature generation part such as automotive muffler, etc.

How to use

  • Remove any foreign substances from the surface to be coated to enhance coating performance.
  • Shake the can well before use.
  • Spray the product evenly from about 20 cm away from the surface.

Precautions

  • This should be used only for its intended purpose.
  • Ventilation is necessary when using the cleaner.
  • Do not inhale it for a long period of time.
  • Avoid long contact with skin.
  • Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
  • As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
    1. Do not use it toward fire.
    2. Provide good ventilation for long-time use.
    3. Do not use near heater or stove.
    4. Do not keep it in the place above 40℃.
    5. Provide ventilation to use it in the closed room.
    6. Do not throw it away into fire.
    7. Punch the can to throw it away.
    8. Spraying may not work well below 5℃.
    9. Be careful, as exposure to direct sunlight or heat may cause an explosion.
    10. Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.