PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 420ml/Can, 20cans/Box
Product information
YECOA YL-501 is a room-temperature galvanizing method using high-purity fine- particle zinc powder,showing the effects of rust inhibition and corrosion prevention by the electrochemical action between zinc powder and metal. Excellent rust inhibition particularly for harsh environments with much salt or ease of corrosion and even already corroded surfaces.
- Room-temperature galvanizing method using high-purity, fine-particle zinc powder.
- Excellent adhesion strength due to the use of a special binder.
- Excellent heat resistance(250℃) and chemical resistance.
- Approved product according to the classification form of Korea.
- Very excellent rust inhibition :SST 300 hrs (KS D 9502)
Usage
- Vessel : Bottom and connection part of vessel, heat exchanger, water tank, drainage tank, marine equipment & facility.
- Bridge : Rust inhibition for pier, wire, rope, bridge, bolts, nuts, & welded part.
- Vehicle : Muffler, body, lower body, fuel tank inlet, welded parts of heavy equipment, parking facility.
- Power generation : Electrical facility, telegraph transmission power, broadcasting facility, antenna, steel tower, street lamp.
- Building : Underground buried pipe, elbow, steel structure, fence, etc.
How to use
- Clean the dust, oil contents and grease on the metal surface.(Using our metal cleaner, they are removed easily)
- Shake up and down lightly before use.
- Spray it about 20~30cm away from target object.
- Apply it again depending on desired thickness.
- Time for tack free drying is about 2∼3 minutes.
- Complete hardening takes 24 hours.
- Use the target after complete hardening.
Precautions
- This should be used only for its intended purpose.
- Ventilation is necessary when using the cleaner.
- Do not inhale it for a long period of time.
- Avoid long contact with skin.
- Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
- As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
- Do not use it toward fire.
- Provide good ventilation for long-time use.
- Do not use near heater or stove.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Spraying may not work well below 5℃.
- Be careful, as exposure to direct sunlight or heat may cause an explosion.
- Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.