※ The features and effects are as follows:

• Fast-drying type for easy application.
• Uniform coating is possible due to even particles.
• Vivid color.
• Excellent adhesion.

• Corrosion Prevention: Protects the metal from external environments that come into direct contact with the metal surface, preventing rust formation.
• Improved Adhesion: The anti-corrosion primer enhances the adhesion between the metal surface and the subsequent topcoat paint, helping the coating last longer.
• Surface Smoothing: Fills in minor surface irregularities or defects on the metal, allowing for a smoother and more even finish with the topcoat.

• Please remove any foreign substances from the application surface for better coating performance.
• Spray the product evenly at a distance of approximately 20 cm from the application surface.
• Coat other necessary parts using the same method.
• Depending on the working conditions, use a cloth or brush along with thinner to finish the cleaning process.

• As an enamel type, it may peel off when used in conjunction with lacquer(oil-based paint).
• This should be used only for its intended purpose.
• Ventilation is necessary when using the cleaner.
• Do not inhale it for a long period of time.
• Avoid long contact with skin.
• Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
• As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
  1. Do not use it toward fire.
  2. Provide good ventilation for long-time use.
  3. Do not use near heater or stove.
  4. Do not keep it in the place above 40℃.
  5. Provide ventilation to use it in the closed room.
  6. Do not throw it away into fire.
  7. Punch the can to throw it away.
  8. Spraying may not work well below 5℃.
  9. Be careful, as exposure to direct sunlight or heat may cause an explosion.
  10. Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.