PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 420㎖/Can, 40cans/Box
Product information
SPRAY PAINT with Non-Detection of Heavy Metals and LOW VOC
※The features and benefits are as follows:
- It has received RoHS certification, meeting the standards for restricted hazardous substances.
- By eliminating toxic substances such as heavy metals, which can have fatal effects on the human body after long-term exposure,
it provides a more pleasant working environment.
Usage
- Surface coloring: Metal, plastic, cement, furniture, ornaments.
- For repair painting: Wood, steel structures.
How to use
- Please remove dust, oil, rust, fungi, etc. on the coated face before spraying.
- Sufficiently shake the container upon use.
- Spray at a distance of 30~40cm.
- Apply thin overlap coating for 2~3 times at an interval of 10 minutes in parallel direction with the coated face as in the , rather than thick coating at one go.
- When the contents remain after use, spray to allow only gas to come out for about 2 seconds by turning the container upside down, and properly cover the cap for storage.
※ Use after checking whether the color and the spray state are correct matching the use for the coated object prior to use.
※ Do not store inside a car or trunk during summer season.
Precautions
- This should be used only for its intended purpose.
- Ventilation is necessary when using the cleaner.
- Do not inhale it for a long period of time.
- Avoid long contact with skin.
- Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
- As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
- Do not use it toward fire.
- Provide good ventilation for long-time use.
- Do not use near heater or stove.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Spraying may not work well below 5℃.
- Be careful, as exposure to direct sunlight or heat may cause an explosion.
- Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.