PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 200㎖/Can, 20cans/Box
Product information
'Stiker Remover(YL-600)' is a cleaning agent with vegetable low emission and low irritability,
using orange extract as the main raw material.
using orange extract as the main raw material.
※The features and effects are as follows.
- Vegetable-based, low-irritant detergent.
- Stiker marks can be removed without any spreading phenomenon.
Usage
- Removal of adhesives, stickers, industrial bond marks, tar, grease, oil, gum, wax, etc.
- Cleaning of pen marks, ballpoint ink stains, and other contaminats.
- Removal of stubborn grease stains on kitchen tiles and ventilator.
How to use
- Removal the paper or vinyl part of the sticker to allow the spray to penetrate easily.
- Spray generously onto the sticker marks.
- Wait for the detergent to penetrate sufficiently, then spray again evenly.
- Wipe the surface with a cloth or rag.
- If there are areas that are not well removed, repeat the above steps.
Precautions
- This should be used only for its intended purpose.
- Ventilation is necessary when using the cleaner.
- Do not inhale it for a long period of time.
- Avoid long contact with skin.
- Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
- As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
- Do not use it toward fire.
- Provide good ventilation for long-time use.
- Do not use near heater or stove.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Spraying may not work well below 5℃.
- Be careful, as exposure to direct sunlight or heat may cause an explosion.
- Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.