PRODUCTS

  • SLAG REMOVER
  • SLAG REMOVER
  • SLAG REMOVER

SLAG REMOVER

YECOA YL-701

Packaging unit

Aerosol 420㎖/Can, 20cans/Box

Product information

YECOA YL-701 has good liquidity for welding Slag, and excellent peeling characteristics of slag lump.
  • Excellent permeability.
  • Safe for metals due to non-corrosiveness.
  • Satisfactory surface states.
  • Outstanding peeling characteristics of Slag as compared with the past (more than 3 times)
  • No occurrence of Blow Hole (in the case of 2 Pieces)
  • Satisfactory peeling characteristics of Slag at base metal temperature of 60℃ Slug remover for manual welding.

Usage

  • Semi-automatic welding, automatic welding, etc.

How to use


  • Always wear safety equipment before work.
  • Keep 30cm away from target object to spray the product.
  • After the coating on the weld when removing Slag generated during the operation, excellent peeling property of Slag.
  • Do not use it near fire.

Precautions

  • It can catch fire when temperature is over 200℃ in using the product.
  • Be careful.
  • Odor is felt hardly when fume and gas are created.
  • Use it in the well-ventilated place.
  • Keep it in the cool place below 40℃
  • Please observe the following points when storing and using the product and discard.
    1. Even though it is low-flammable, keep away from fire to spray it.
    2. Provide good ventilation for long-time use.
    3. Keep it in the well-ventilated place below 40℃.
    4. Do not use it toward fire.
    5. Do not use near heater or stove.
    6. Do not use in the room using fire.
    7. Do not keep it in the place above 40℃.
    8. Provide ventilation to use it in the closed room.
    9. Do not throw it away into fire.
    10. Punch the can to throw it away.
    11. Do not keep it in the closed place.
    12. Spraying may not work well below 5℃.