PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 420㎖/Can, 20cans/Box
Product information
YECOA YL-902 is a product with excellent insulation, humidity-proofing, hydrophobicity,dust-protection effect.Flexibility and endurance are satisfactory, while it takes pride in superior adhesion.It is a product with excellent insulation characteristics and prevention of chemical intrusion.
- Acrylic hydrophobic insulation agent of room-temperature curing type.
- Excellent resistance to ozone, arc, heat and chemicals.
- Excellent adhesion and surface gloss.
- Excellent resistance to impact, wear, and vibration.
- RoHS(6 type hazardous substances) undetected.
Usage
- PCB Board
- Coating agent for humidity proofing and sealing protection
- Insulation agent for Coil, Connectors, Control Box, etc.
How to use
- Always wear safety equipment before work.
- Clean the dust, oil contents and grease on the metal surface. (Using our ECC cleaner, they are removed easily)
- Shake up and down lightly before use.
- Spray twice or three times to make thick film formed.
- Spray it about 20~30cm away from target object.
Precautions
- Do not use it to human body.
- Provide good ventilation.
- Keep it in the place below 40℃ without direct sunlight.
- Do not spray it toward fire.
- Avoid contact with it, because contact with strong alkali, strong acid cleaner and thinner(B.T.X) makes coating film damaged after coating film forms.
- Please observe the following points when storing and using the product and discard.
- Even though it is low-flammable, keep away from fire to spray it.
- Provide good ventilation for long-time use.
- Keep it in the well-ventilated place below 40℃.
- Do not use it toward fire.
- Do not use near heater or stove.
- Do not use in the room using fire.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Do not keep it in the closed place.
- Spraying may not work well below 5℃.