PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 460㎖/can, 12cans/box
Product information
SPRAY ADHESIVE(YL-505) offers excellent initial adhesive and enables swift and uniform application aver a wide area.
Due to its low absorption and absence of formalin content, it allows for effective operation with strong bonding.
Due to its low absorption and absence of formalin content, it allows for effective operation with strong bonding.
- Spray adhesive for permanent fixing.
- Adhesive of spray injection type for insulating wallpapers.
Usage
- Adhesion for paper and paper labels, fabric, cork, glass, metal acetate, and corrugated cardboard.
- Application on silk wallpaper, textured wallpaper, cement walls, painted walls, and installation of insulated wallpaper.
How to use
- Remove foreign substances from the application surface.
- Shake the container lightly before use.
- Spray from a distance of 20 cm from the application surface.
- If more coverage is needed, spray 1 - 2 times as desired.
- After spraying, wait for 10 seconds before adhering the desired object.
- For long-term storage, store the container upside down and spray until no liquid comes out to prevent clogging.
Precautions
- This should be used only for its intended purpose.
- Ventilation is necessary when using the cleaner.
- Do not inhale it for a long period of time.
- Avoid long contact with skin.
- Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
- As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
- Do not use it toward fire.
- Provide good ventilation for long-time use.
- Do not use near heater or stove.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Spraying may not work well below 5℃.
- Be careful, as exposure to direct sunlight or heat may cause an explosion.
- Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.