※The features and benefits are as follows:

• Contains a large amount of extreme pressure additives, providing excellent performance in heavy-duty cutting of special steels such as stainless steel and alloy steel.
• Especially, it uses highly refined, high-flash-point base oil, which minimizes smoke even under harsh conditions and reduces the problem of oil misting, making it a non-water-soluble product.
• Developed for heavy-duty machining where frictional heat is a significant issue, it is designed to be used on both ferrous and non-ferrous metals. It also delivers excellent performance in difficult machining processes such as broaching, tapping, threading, deep-hole boring, and gun drilling.

• Can be applied to the machining of various difficult-to-cut materials.
  1. Broaching (Broaching)
  2. Tapping (Tapping)
  3. Drilling (Drilling)
  4. Deep-Hole Boring and Machining (Deep-Hole-Boring)
  5. Gun Drilling (Gun-Drilling)
• Designed to be suitable for non-ferrous metals, it can be applied to difficult material machining.

• Pour an appropriate amount (10~20cc) on the surface and proceed with the tapping operation.
• Continuously apply the product during use as needed for the task.
• Depending on the work conditions, finish by wiping with a cloth or brush.

• Do not keep it in the place above 40℃.
• Provide ventilation to use it in the closed room.
• Do not keep it in the closed place.
• Do not use it to human body.

Please observe the following points when storing and using the product and discard.

• Even though it is low-flammable, keep away from fire to spray it.
• Provide good ventilation for long-time use.
• Keep it in the well-ventilated place below 40℃.
• Do not use near heater or stove.
• Do not use in the room using fire.
• Do not keep it in the place above 40℃.
• Provide ventilation to use it in the closed room.
• Do not keep it in the closed place.