PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Aerosol 420㎖/Can, 30cans/Box
Product Information
YECOA YL-504B is paintable 2nd release agent.
※ Characteristics and effects are as follows.
- Paintable.
- Excellent release properties.
- Suitable for precision molds.
- Non-corrosive to molds.
- Leaves no residue.
- RoHS(6 type hazardous substances) undetected.
Usage
- Injection Molding : Used to easily remove plastic or rubber parts from molds without damage.
- Epoxy resin, phenolic resin, melamine resin, PVC resin, etc.
How to use
- Remove foreign substances on the coating surface and injection residues.
- Spray from a distance of about 20 cm from the coating surface.
- Depending on the work situation, finish by wiping or brushing with a cloth.
Precautions
- This should be used only for its intended purpose.
- Ventilation is necessary when using the cleaner.
- Do not inhale it for a long period of time.
- Avoid long contact with skin.
- Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
- As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
- Do not use it toward fire.
- Provide good ventilation for long-time use.
- Do not use near heater or stove.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not throw it away into fire.
- Punch the can to throw it away.
- Spraying may not work well below 5℃.
- Be careful, as exposure to direct sunlight or heat may cause an explosion.
- Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.