※ Characteristics and effects are as follows :

• Heat-Resistance : 800℃
• Excellent resistance to water, oil and heat.
• Solid film and excellent adherence, wear resistance.
• Excellent rust resistance.

• Industrial Machinery and Equipment Protection :
  Protect the surface of industrial machinery and equipment operating at high temperatures from corrosion, oxidation, and heat damage.
• Automobile Engine and Parts Protection :
  Protects automobile engines, exhaust systems, turbochargers, and other components to maintain performance and extend lifespan.
• Stove Surface Protection :
  Protects the surface of stoves continuously exposed to high temperatures.

• Remove dust, oil, rust etc. from the application surface.
• Shake the container before using it.
• Completely remove aged coatings during maintenance painting.
• Spray 2~3 times from a distance of 20cm from the coating surface
  (When painting, do not apply a single coating of the desired thickness at once, but divide it into several applications).
• Apply it again depending on desired thickness.
• Leave the target for one hour after spraying and harden it for 10~20 minutes at 150∼200℃.
  (Solvent resistance, cohesion and heat resistance increase).
• Use the target after complete hardening.

• This should be used only for its intended purpose.
• Ventilation is necessary when using the cleaner.
• Do not inhale it for a long period of time.
• Avoid long contact with skin.
• Test prior to applying for Fluorine resin and Fluorine rubber products, because the Fluorine solvents is used.
• As a flammable product using compressed gas, it is dangerous. Please observe the following precautions.
  1. Do not use it toward fire.
  2. Provide good ventilation for long-time use.
  3. Do not use near heater or stove.
  4. Do not keep it in the place above 40℃.
  5. Provide ventilation to use it in the closed room.
  6. Do not throw it away into fire.
  7. Punch the can to throw it away.
  8. Spraying may not work well below 5℃.
  9. Be careful, as exposure to direct sunlight or heat may cause an explosion.
  10. Check for sparks in the vicinity, wait for the gas to disperse after spraying a certain amount, and then reuse.